Eleaf iStick Power
- Availability: In Stock
- Brand: ELEAF
- Product Code: iStick Power
- Reward Points: 200
- Price in reward points: 3999
A beautiful, clear screen shows all your vaping information at a glance and large, responsive buttons make the iPower a pleasure to use.
Five output modes allow for versatility with a range of tank’s and dripper’s. Alongside the standard wattage and temperature modes there is also smart mode and bypass mode which allows your iPower to behave as a mechanical mod would.
Smart mode remembers your wattage settings for up to 10 wire resistances, great for if you are frequently changing between tanks and coils as it will automatically set your wattage to your preferred setting for your chosen resistance.
Upgradeable firmware will ensure your iPower battery mod is always up to date, while stainless steel threads and a spring loaded firing pin means no need for adjustments when using various RTA’s or RDA’s. Dual circuit protection keeps you vaping safe and helps prevent over charging and over discharging.
- Large 5000mAh battery capacity
- Up to 80W of power
- Five output modes including smart mode
- Output modes - VW / Bypass / Smart / TC (Ni, Ti, SS) / TCR
- Output wattage - 1-80W
- Resistance ranges - 0.05-1.5ohm (TC modes) / 0.1-3.5ohm (VW/Bypass/Smart mode)
- Temperature ranges - 100-315°C / 200-600°F
- Dimensions - 49.5mm x 23.5mm x 83.5mm
- 1 x Eleaf iPower battery mod
- 1 x USB charging cable
- 1 x User manual
Which strength e-liquid should I choose?
This depends on how powerful your machine is. If you run your machine under 20 watts or on a coil rated above 1.2 Ohms, then you might need a higher nicotine dosage in your e-liquid. The higher the wattage of your machine, the less nicotine you need. So somebody using a typical 0.5 Ohm coil running it at about 35 watts will probably be fine with a 3mg.
Which coil should I use?
Most eCig manufacturers normally produce a selection of different coils for each of their devices. The power of a coil is measured in Ohms. The lower the Ohms, the more power that coil requires in order to get to the right temperature. If your looking for big vapour, then you would use a coil rated 0.5 Ohms or lower. If you wanted a coil that was good for smoking like a cigarette, then anything above 1.2 Ohms will be fine. Coils with higher Ohm ratings require less power and produce less vapour.
What wattage should I set my device to?
This depends completely on the coil you are using. As discussed above, there are many different types of coils, each with a recommended minimum and maximum wattage.
Why is my device leaking?
There are normally two main reasons why this could be happening.
1) You are running the coil too low. Not giving the coil enough power means it can't turn the liquid into vapour, resulting in flooding or leaking.
2) You are using a powerful coil and puffing on it like a cigarette. Coils rated at 0.5 Ohms or lower are specifically designed for Direct Lung vaping.
Why do i get a burning taste?
This is normally a sign that the coil is ready to be replaced. This will also happen if you let your juice run too low.
Why must I Prime my coil?
Priming your coil avoids any unwanted burning tastes when firing up a new coil for the first time. To prime a coil, simply put 4-5 drops of e-liquid into THE TOP before firing it up. The e-liquid will soak into the cotton and this will help you avoid any undesired results.
Do I get a warranty?
JuiceShop offers a full 28 day in house warranty on all our hardware. Should you experience any issues with a device purchased from us, then please contact us withing the 28 day period. For returns after 28 days, please refer to the manufacturers return procedure.
If you wish to exchange a product, the item must still be in its original unopened state.
We can not accept returns on e-liquids.
ALL RETURNS MUST BE ACCOMPANIED WITH THE ORIGINAL RECEIPT OF SALE.