Aspire Feedlink Revvo Kit + E-liquid
- Availability: In Stock
- Brand: Aspire
- Product Code: ASFRK
- Reward Points: 300
- Price in reward points: 5999
Aspire is proud to announce the Feedlink Revvo Kit, an all new Aspire squonk mod with a slightly redesigned Revvo boost tank. Yes, it’s still the same out of this world Revvo tank with the awesome, innovative ARC coil but now coupled with a squonk mod, the Feedlink. The Feedlink is a single 18650 battery bypass firing mod with all the quality and safety features you have come to expect from Aspire. It’s almost pistol grip feel makes it very ergonomic in the hand and easy to operate the squonk bottle and fire button with just one hand, an absolute joy to hold and use. In addition to the Feedlink mod there is the newly designed bottom feeding Revvo boost Tank. Aspire had already broken the mold for a tank with its new, flat Radial coil, and now it’s even easier to fill with a bottom feeding squonk pin! The tank itself comes in a TPD compliant 2ml version, who needs any more capacity when just a squeeze of the squonk bottle will top up your tank, you don’t even have to put it down.
The ‘pistol grip’ mod including the tank is ergonomically styled and fits snugly in the hand easy for left or right hand use.
The tank is simplicity itself to use, it has an ultra convenient bottom feed squonk pin system where you don’t even have to open, unscrew, lift or otherwise adjust for filling.
The tank has the same awesome adjustable airflow with three large air inlets and comes in a TPD compliant 2ml version with no need for a larger tank due to the squonk style bottom feed filling system,just squeeze the squonk bottle and it’s filled and ready to go again.
This is simplicity itself, just an anti-clockwise turn of the bottle retaining screw with release the bottle carrier and the bottle. Remove the bottle from the carrier, unscrew the metal top-cap and feeder tube and fill with your favorite e-liquid. Replace the top-cap/feeder tube, reinsert into the carrier and replace into the mod, remembering to replace and tighten the bottle retaining screw.
Similar to the squonk bottle removal/refilling, just unscrew the battery cap in the base of the mod, insert a fresh 18650 battery, positive post upper most towards the top of the mod, replace the screw-in battery cap firmly and the mod is ready to use.
To fill or top up the tank, gently squeeze the squonk bottle until you can see your e-liquid rising into the tank, squeeze again to fill the tank to your requirements but don’t try to overfill, remember you can top up easily with just another gentle squeeze or two. Once filled (just as with the original Revvo tank), if it’s a new coil or the coil has become dry for any reason, invert tank to saturate the coil before vaping.
- 1* Feedlink mod
- 1* 2ml Revvo Boost tank
- 2* Coils (0.10-0.14Ω)
- 1* Glass tube
- 11* O-rings
- 2* Warning card
- 1* User manual
- 1* Warranty card
- 1x Free 10ml Juice Shop E-liquid
Which strength e-liquid should I choose?
This depends on how powerful your machine is. If you run your machine under 20 watts or on a coil rated above 1.2 Ohms, then you might need a higher nicotine dosage in your e-liquid. The higher the wattage of your machine, the less nicotine you need. So somebody using a typical 0.5 Ohm coil running it at about 35 watts will probably be fine with a 3mg.
Which coil should I use?
Most eCig manufacturers normally produce a selection of different coils for each of their devices. The power of a coil is measured in Ohms. The lower the Ohms, the more power that coil requires in order to get to the right temperature. If your looking for big vapour, then you would use a coil rated 0.5 Ohms or lower. If you wanted a coil that was good for smoking like a cigarette, then anything above 1.2 Ohms will be fine. Coils with higher Ohm ratings require less power and produce less vapour.
What wattage should I set my device to?
This depends completely on the coil you are using. As discussed above, there are many different types of coils, each with a recommended minimum and maximum wattage.
Why is my device leaking?
There are normally two main reasons why this could be happening.
1) You are running the coil too low. Not giving the coil enough power means it can't turn the liquid into vapour, resulting in flooding or leaking.
2) You are using a powerful coil and puffing on it like a cigarette. Coils rated at 0.5 Ohms or lower are specifically designed for Direct Lung vaping.
Why do i get a burning taste?
This is normally a sign that the coil is ready to be replaced. This will also happen if you let your juice run too low.
Why must I Prime my coil?
Priming your coil avoids any unwanted burning tastes when firing up a new coil for the first time. To prime a coil, simply put 4-5 drops of e-liquid into THE TOP before firing it up. The e-liquid will soak into the cotton and this will help you avoid any undesired results.
Do I get a warranty?
JuiceShop offers a full 28 day in house warranty on all our hardware. Should you experience any issues with a device purchased from us, then please contact us withing the 28 day period. For returns after 28 days, please refer to the manufacturers return procedure.
If you wish to exchange a product, the item must still be in its original unopened state.
We can not accept returns on e-liquids.
ALL RETURNS MUST BE ACCOMPANIED WITH THE ORIGINAL RECEIPT OF SALE.