Joyetech - Cuboid Lite Kit
- Availability: In Stock
- Brand: JOYETECH
- Product Code: JOCLK
- Reward Points: 350
- Price in reward points: 6999
The Cuboid Lite from Joyetech has to be seen to be believed. A 3000mAh battery, in a compact design, also includes a 1.45 inch TFT colour screen to display all your key vaping information and comes as a complete kit with the EXCEED D22 Tank.
The Cuboid Lite packs a 3000mAh battery into an extremely compact design, ensuring it fits in your hand comfortably. With just 3 buttons, the Cuboid Lite is extremely simple to use, but still includes a whole host of vaping technology, such as variable wattage, temperature control and power limit protection.
With a detachable structure for easy cleaning and maintenance, the EXCEED D22 Tank is designed with flavour in mind. The tank is compatible with 1.2ohm and 0.5ohm EX Atomizer Heads, and is therefore suitable for mouth to lung and direct lung vapers.
Sitting in the centre of the body is a 1.45 inch TFT colour screen. With an easy to use interface, the Cuboid Lite displays all your vaping information at a glance, including remaining battery life and current power or temperature settings.
- Battery capacity - 3000mAh
- Output wattage - 1-80W
- Output modes - VW / VT / Bypass / TCR
- Resistance range - 0.05-1.5ohm for Temp & TCR mode / 0.1-3.5ohm for Power & Bypass mode
- Temperature range - 100-315°C/ 200-600°F
- Tank capacity - 2ml
- Atomizer resistance - 0.5ohm / 1.2ohm
- 1 x Cuboid Lite
- 1 x EXCEED D22 Tank
- 2 x EX atomizer heads
- 1 x QC USB cable
- 1 x User Manual
Which strength e-liquid should I choose?
This depends on how powerful your machine is. If you run your machine under 20 watts or on a coil rated above 1.2 Ohms, then you might need a higher nicotine dosage in your e-liquid. The higher the wattage of your machine, the less nicotine you need. So somebody using a typical 0.5 Ohm coil running it at about 35 watts will probably be fine with a 3mg.
Which coil should I use?
Most eCig manufacturers normally produce a selection of different coils for each of their devices. The power of a coil is measured in Ohms. The lower the Ohms, the more power that coil requires in order to get to the right temperature. If your looking for big vapour, then you would use a coil rated 0.5 Ohms or lower. If you wanted a coil that was good for smoking like a cigarette, then anything above 1.2 Ohms will be fine. Coils with higher Ohm ratings require less power and produce less vapour.
What wattage should I set my device to?
This depends completely on the coil you are using. As discussed above, there are many different types of coils, each with a recommended minimum and maximum wattage.
Why is my device leaking?
There are normally two main reasons why this could be happening.
1) You are running the coil too low. Not giving the coil enough power means it can't turn the liquid into vapour, resulting in flooding or leaking.
2) You are using a powerful coil and puffing on it like a cigarette. Coils rated at 0.5 Ohms or lower are specifically designed for Direct Lung vaping.
Why do i get a burning taste?
This is normally a sign that the coil is ready to be replaced. This will also happen if you let your juice run too low.
Why must I Prime my coil?
Priming your coil avoids any unwanted burning tastes when firing up a new coil for the first time. To prime a coil, simply put 4-5 drops of e-liquid into THE TOP before firing it up. The e-liquid will soak into the cotton and this will help you avoid any undesired results.
Do I get a warranty?
JuiceShop offers a full 28 day in house warranty on all our hardware. Should you experience any issues with a device purchased from us, then please contact us withing the 28 day period. For returns after 28 days, please refer to the manufacturers return procedure.
If you wish to exchange a product, the item must still be in its original unopened state.
We can not accept returns on e-liquids.
ALL RETURNS MUST BE ACCOMPANIED WITH THE ORIGINAL RECEIPT OF SALE.