Oh, you found me! Use the code "MB1017" and get 10% off Mod batteries

Search
0
Shopping Cart

SMOK G-PRIV BABY LUXE EDITION + E-LIQUID

  • Availability: In Stock
  • Brand: SMOK
  • Product Code: SMGPBL
  • Reward Points: 300

  • £59.99

  • Price in reward points:
    5999

Available Options



Share:

Say hello to the latest member of the G-Priv family, The G-Priv Baby Luxe Edition. Beautifully designed to reflect the same unique style as it's predecessor and finished in a number of gorgeous chrome colours. 

Unlike previous Baby versions of Smok devices, the G-Priv Baby gets it's power from a removable 18650 battery that can easily be replaced by unscrewing the cap on top of the mod. Make changes to your settings quickly and easily with the large 2" colour touch screen which will gain you quick access to the various settings including Temperature Control, screen colour, pre-heat presets and more. 

The large side mounted fire bar makes using the G-Priv Baby a pleasure. Located just above the fire bar you will find a little button that that with a quick tap, will put the screen into stealth mode. hold it for a few seconds and it will lock the wattage.

Complete with the new TFV12 Prince baby tank with matching Cobra style vape tip.

Think of the G-Priv Baby Luxe kind of like the baby Rolls Royce of the Smok range. Beautiful. Elegant. But powerful. 


G-PRIV BABY LUXE MOD

  • Size: 71x51x29.2mm
  • Weight: 165g
  • Power Range: 1W-85W
  • Standby Current: <250uA
  • Output Voltage: 0.5V-9V
  • Resistance Range: 0.1Ω-2.5Ω (VW) / 0.05Ω-2Ω (TC)
  • Temperature Range: 200F-600F / 100C-315C

TFV12 Prince Baby Tank (2ML)

  • Material: Stainless Steel
  • Size: 23x53.7mm
  • Weight: 56g
  • Capacity: 2ml
  • Thread: 510

Kit Includes:

  • 1 x SMOK G Priv Baby Luxe Edition Mod
  • 1 x SMOK TFV12 Baby Prince EU Tank (2ml)
  • 1 x V8 Baby-Q4 0.4Ω Quadruple Coil (Pre-Installed)
  • 1 x V8 Baby-Q2 0.4Ω Dual Coil
  • 1x USB Cable
  • 1 x User Manual
  • Spare Parts



WARNING

  • Always fully read the instruction manual before using the device.
  • Always turn your device off when travelling (normally 5 clicks).
  • Always use a high drain battery rated 30Amp or above.
  • Never charge your device using an adapter with an output greater than 1Amp.
  • Always keep loose batteries stored in a safe environment and away from metal objects.

Write a review

Please login or register to review

Which strength e-liquid should I choose?

This depends on how powerful your machine is. If you run your machine under 20 watts or on a coil rated above 1.2 Ohms, then you might need a higher nicotine dosage in your e-liquid. The higher the wattage of your machine, the less nicotine you need. So somebody using a typical 0.5 Ohm coil running it at about 35 watts will probably be fine with a 3mg. 


Which coil should I use?

Most eCig manufacturers normally produce a selection of different coils for each of their devices. The power of a coil is measured in Ohms. The lower the Ohms, the more power that coil requires in order to get to the right temperature. If your looking for big vapour, then you would use a coil rated 0.5 Ohms or lower. If you wanted a coil that was good for smoking like a cigarette, then anything above 1.2 Ohms will be fine. Coils with higher Ohm ratings require less power and produce less vapour. 


What wattage should I set my device to?

This depends completely on the coil you are using. As discussed above, there are many different types of coils, each with a recommended minimum and maximum wattage.


Why is my device leaking?

There are normally two main reasons why this could be happening.
1) You are running the coil too low. Not giving the coil enough power means it can't turn the liquid into vapour, resulting in flooding or leaking.
2) You are using a powerful coil and puffing on it like a cigarette. Coils rated at 0.5 Ohms or lower are specifically designed for Direct Lung vaping. 


Why do i get a burning taste?

This is normally a sign that the coil is ready to be replaced. This will also happen if you let your juice run too low.


Why must I Prime my coil?

Priming your coil avoids any unwanted burning tastes when firing up a new coil for the first time. To prime a coil, simply put 4-5 drops of e-liquid into THE TOP before firing it up. The e-liquid will soak into the cotton and this will help you avoid any undesired results. 


Do I get a warranty?

JuiceShop offers a full 28 day in house warranty on all our hardware. Should you experience any issues with a device purchased from us, then please contact us withing the 28 day period. For returns after 28 days, please refer to the manufacturers return procedure. 

If you wish to exchange a product, the item must still be in its original unopened state. 

We can not accept returns on e-liquids. 

ALL RETURNS MUST BE ACCOMPANIED WITH THE ORIGINAL RECEIPT OF SALE.

Related Products