Oh, you found me! Use the code "MB1017" and get 10% off Mod batteries

Search
0
Shopping Cart

SMOK GX2/4 KIT

  • Availability: In Stock
  • Brand: SMOK
  • Product Code: GX24
  • Reward Points: 350

  • £59.99

  • Price in reward points:
    6999

Available Options



Share:

Would you like the portability powered by 2x batteries or glorious style by 4x batteries. GX2/4 meets all your demands with the smallest size among all 220W mods in the global. Meanwhile, its power can upgrade to 350W via replacing the battery cover. When combining with TFV8 Big Baby, you could have double experiences immediately. Resembled battery cover brings new twins mission vaping era. Innovation keeps changing the vaping experience!

With a 87.2x46x26mm size, GX2/4 has the smallest size among all 220W mods (2x 18650 batteries) in the global, which provides a easier going out. 

After replacing the battery cover, you can enjoy 350W higher wattage that powered by 4 x 18650 batteries. Higher power output and massive clouds for you.

GX2/4 provides multiple types of protections to safe guard against potential risk.


Specifications

(GX2/4 Mod in 2 battery mode):

  • Height: 82.7mm
  • Width: 46mm
  • Depth: 26mm
  • Weight: 137.2g
  • Power Range: 6.0W - 220W
  • Standby Current: <500uA
  • Temperature Range: 200F - 600F / 100C - 315C
  • Resistance Range: 0.10 Ohm - 3.00 Ohm (VW Mode) / 0.06 Ohm - 3.00 Ohm (TC Mode)


(GX2/4 Mod in 4 battery mode):

  • Height: 82.7mm
  • Width: 59mm
  • Depth: 44mm
  • Weight: 204.9g
  • Power Range: 6.0W - 350W
  • Standby Current: <500uA
  • Temperature Range: 200F - 600F / 100C - 315C
  • Resistance Range: 0.10 Ohm - 3.00 Ohm (VW Mode) / 0.06 Ohm - 3.00 Ohm (TC Mode)


(TFV8 Big Baby Tank (TPD):

  • Capacity: 2ml
  • Height: 56mm
  • Diameter: 24.5mm
  • Material: Stainless Steel
  • Thread: 510


Kit Includes

  • 1x GX2/4 Mod
  • 1x TFV8 Big Baby Tank
  • 1x Preinstalled V8 Baby-Q2 Coil Head
  • 1x V8-Q2 Coil Head
  • 1x Replacement Battery Cover
  • USB Upgrade Cable
  • Spare Parts
  • Instructional Manual



WARNING

  • Always fully read the instruction manual before using the device.
  • Always turn your device off when travelling (normally 5 clicks).
  • Always use a high drain battery rated 30Amp or above.
  • Never charge your device using an adapter with an output greater than 1Amp.
  • Always keep loose batteries stored in a safe environment and away from metal objects.

Write a review

Note: HTML is not translated!
    Bad           Good

Which strength e-liquid should I choose?

This depends on how powerful your machine is. If you run your machine under 20 watts or on a coil rated above 1.2 Ohms, then you might need a higher nicotine dosage in your e-liquid. The higher the wattage of your machine, the less nicotine you need. So somebody using a typical 0.5 Ohm coil running it at about 35 watts will probably be fine with a 3mg. 


Which coil should I use?

Most eCig manufacturers normally produce a selection of different coils for each of their devices. The power of a coil is measured in Ohms. The lower the Ohms, the more power that coil requires in order to get to the right temperature. If your looking for big vapour, then you would use a coil rated 0.5 Ohms or lower. If you wanted a coil that was good for smoking like a cigarette, then anything above 1.2 Ohms will be fine. Coils with higher Ohm ratings require less power and produce less vapour. 


What wattage should I set my device to?

This depends completely on the coil you are using. As discussed above, there are many different types of coils, each with a recommended minimum and maximum wattage.


Why is my device leaking?

There are normally two main reasons why this could be happening.
1) You are running the coil too low. Not giving the coil enough power means it can't turn the liquid into vapour, resulting in flooding or leaking.
2) You are using a powerful coil and puffing on it like a cigarette. Coils rated at 0.5 Ohms or lower are specifically designed for Direct Lung vaping. 


Why do i get a burning taste?

This is normally a sign that the coil is ready to be replaced. This will also happen if you let your juice run too low.


Why must I Prime my coil?

Priming your coil avoids any unwanted burning tastes when firing up a new coil for the first time. To prime a coil, simply put 4-5 drops of e-liquid into THE TOP before firing it up. The e-liquid will soak into the cotton and this will help you avoid any undesired results. 


Do I get a warranty?

JuiceShop offers a full 28 day in house warranty on all our hardware. Should you experience any issues with a device purchased from us, then please contact us withing the 28 day period. For returns after 28 days, please refer to the manufacturers return procedure. 

If you wish to exchange a product, the item must still be in its original unopened state. 

We can not accept returns on e-liquids. 

ALL RETURNS MUST BE ACCOMPANIED WITH THE ORIGINAL RECEIPT OF SALE.

Related Products



CONFIRM
DECLINE
Please confirm that You are Over the age of 18