Oh, you found me! Use the code "MB1017" and get 10% off Mod batteries

Search
0
Shopping Cart

ASPIRE SPEEDER MOD

  • Availability: In Stock
  • Brand: ASPIRE
  • Product Code: ASSPM
  • Reward Points: 275

  • £54.99

  • Price in reward points:
    5499

Available Options



Share:

The all new, all powerful Aspire Speeder. Bringing a high powered option to the Aspire brand. The Speeder is a compact but heavy duty 200W, TC mod. Dual 18650 high rate batteries power this device that is packed with all the extras that Aspire users come to expect. Auto rotate 0.96 inch OLED screen, continuous fire adjustable,multiple TC/VV/VW/TCR and CPS(Customizable Power Setting)options to nail that vaping sweet spot. You can couple this powerhouse of a mod with your favorite tanks and the vast array of adjustable options on the detailed display will allow for any changes!

Along with its masses of power, there are also a ton of features that really allow for fine tuning. Wattage range 1-200W, Voltage range 0.1-8.4V, TC range 200-600℉ (100-315℃) Further options, TCR, Bypass and CPS can really nail the flavor/vapor from your tanks.

Pressing fire button and “+” button simultaneously for 0.5 second will allow you to select between Wattage, Voltage, Bypass, CPS(C1/C2/C3), TC(Ni/Ti/SS316L) and TCR(M1/M2/M3). Pressing “+” or “- ” button to select modes, fire button to select/confirm.

Speeder can also be charged via a Micro-USB port. When charging the screen will display a flashing battery icon, voltage level,charge current as well as charge time.


Specification:

  • Max Wattage: 200w Output
  • USB Port: Firmware Upgradable/Charging Port
  • Dimensions: 88mm x 46mm x 31mm
  • Screen: 0.96" OLED Display
  • Spring Loaded 510 Connector
  • Dual 18650 Not Included
  • Auto Screen Rotation
  • Temperature Control: Ni200, Titanium and Stainless Steel SS316L Voltage, Wattage, Bypass and Temperature Mode

 

Kit Includes:

  • 1* Speeder Mod
  • 1* Micro USB cable
  • 1* Warranty Card
  • 1* User Manual



WARNING

  • Always fully read the instruction manual before using the device.
  • Always use a high drain battery rated 30Amp or above.
  • Never charge your device using an adapter with an output greater than 1Amp.
  • Always keep loose batteries stored in a safe environment and away from metal objects.

Mod Specification:
Battery 2x 18650
Power 200w
Temperature Control Yes

Write a review

Note: HTML is not translated!
    Bad           Good

Which strength e-liquid should I choose?

This depends on how powerful your machine is. If you run your machine under 20 watts or on a coil rated above 1.2 Ohms, then you might need a higher nicotine dosage in your e-liquid. The higher the wattage of your machine, the less nicotine you need. So somebody using a typical 0.5 Ohm coil running it at about 35 watts will probably be fine with a 3mg. 


Which coil should I use?

Most eCig manufacturers normally produce a selection of different coils for each of their devices. The power of a coil is measured in Ohms. The lower the Ohms, the more power that coil requires in order to get to the right temperature. If your looking for big vapour, then you would use a coil rated 0.5 Ohms or lower. If you wanted a coil that was good for smoking like a cigarette, then anything above 1.2 Ohms will be fine. Coils with higher Ohm ratings require less power and produce less vapour. 


What wattage should I set my device to?

This depends completely on the coil you are using. As discussed above, there are many different types of coils, each with a recommended minimum and maximum wattage.


Why is my device leaking?

There are normally two main reasons why this could be happening.
1) You are running the coil too low. Not giving the coil enough power means it can't turn the liquid into vapour, resulting in flooding or leaking.
2) You are using a powerful coil and puffing on it like a cigarette. Coils rated at 0.5 Ohms or lower are specifically designed for Direct Lung vaping. 


Why do i get a burning taste?

This is normally a sign that the coil is ready to be replaced. This will also happen if you let your juice run too low.


Why must I Prime my coil?

Priming your coil avoids any unwanted burning tastes when firing up a new coil for the first time. To prime a coil, simply put 4-5 drops of e-liquid into THE TOP before firing it up. The e-liquid will soak into the cotton and this will help you avoid any undesired results. 


Do I get a warranty?

JuiceShop offers a full 28 day in house warranty on all our hardware. Should you experience any issues with a device purchased from us, then please contact us withing the 28 day period. For returns after 28 days, please refer to the manufacturers return procedure. 

If you wish to exchange a product, the item must still be in its original unopened state. 

We can not accept returns on e-liquids. 

ALL RETURNS MUST BE ACCOMPANIED WITH THE ORIGINAL RECEIPT OF SALE.

Related Products



CONFIRM
DECLINE
Please confirm that You are Over the age of 18