Oh, you found me! Use the code "MB1017" and get 10% off Mod batteries

Search
0
Shopping Cart

Eleaf iStick Pico Mod

  • Availability: In Stock
  • Brand: ELEAF
  • Product Code: Pico
  • Reward Points: 210

  • £41.99

  • Price in reward points:
    4199

Available Options



Share:

Introducing the iStick Pico e-cigarette device, one of the smallest removable 18650 box mods on the market. Up to 75W of power, the latest in variable temperature technology as well as upgradeable firmware, the iStick Pico is ready to take over the vaping scene.

Only slightly taller than an 18650 battery the iStick Pico is the definition of palm sized. The removable 18650 battery means a quick and easy change over when charging and means the overall life of the Pico can be much longer.

A huge variety of output modes means outstanding versatility. Standard variable wattage (VW) is available, as well as variable temperature (VT), Bypass mode and TCR mode. The VT mode has a range of settings to allow different coil types to be use, nickel (Ni), titanium (Ti) and stainless steel (SS). TCR mode (Temperature Coefficient Resistance) which allows customisation of settings depending on the coil material used, further improving the accuracy of temperature control.

The unique bottom design accommodates your selection keys and a series of vent holes for added safety. Upgradeable firmware will keep you one step ahead of the vaping game, ensuring your iStick Pico always has the most up to date vaping technology.

 

Features:

  • Small, compact size
  • Removable 18650 battery
  • Wide variety of output modes
  • Upgradeable firmware  

 

Specification:

  • Battery capacity – 2100mAh (From supplied battery)
  • Output modes – VW / Bypass / VT-Ni / VT-Ti / VT-SS / TCR
  • Output wattage – 1 – 75W
  • Output temperature - 100-315℃/200-600℉
  • Dimensions - 45mm x 23mm x 70.5mm
  • Colours – Black, Hot Pink, Grey, Silver and White  

 

Kit Includes:

  • 1 x iStick Pico
  • 1 x Samsung 25R 18650 battery (upgrade to a Sony VTC6 for only £4!)
  • 1 x USB cable
  • 1 x User manual  


WARNING

  • Always fully read the instruction manual before using the device.
  • Always use a high drain battery rated 30Amp or above.
  • Never charge your device using an adapter with an output greater than 1Amp.
  • Always keep loose batteries stored in a safe environment and away from metal objects.

Mod Specification:
Battery 18650
Power 75w
Temperature Control Yes

Write a review

Note: HTML is not translated!
    Bad           Good

Which strength e-liquid should I choose?

This depends on how powerful your machine is. If you run your machine under 20 watts or on a coil rated above 1.2 Ohms, then you might need a higher nicotine dosage in your e-liquid. The higher the wattage of your machine, the less nicotine you need. So somebody using a typical 0.5 Ohm coil running it at about 35 watts will probably be fine with a 3mg. 


Which coil should I use?

Most eCig manufacturers normally produce a selection of different coils for each of their devices. The power of a coil is measured in Ohms. The lower the Ohms, the more power that coil requires in order to get to the right temperature. If your looking for big vapour, then you would use a coil rated 0.5 Ohms or lower. If you wanted a coil that was good for smoking like a cigarette, then anything above 1.2 Ohms will be fine. Coils with higher Ohm ratings require less power and produce less vapour. 


What wattage should I set my device to?

This depends completely on the coil you are using. As discussed above, there are many different types of coils, each with a recommended minimum and maximum wattage.


Why is my device leaking?

There are normally two main reasons why this could be happening.
1) You are running the coil too low. Not giving the coil enough power means it can't turn the liquid into vapour, resulting in flooding or leaking.
2) You are using a powerful coil and puffing on it like a cigarette. Coils rated at 0.5 Ohms or lower are specifically designed for Direct Lung vaping. 


Why do i get a burning taste?

This is normally a sign that the coil is ready to be replaced. This will also happen if you let your juice run too low.


Why must I Prime my coil?

Priming your coil avoids any unwanted burning tastes when firing up a new coil for the first time. To prime a coil, simply put 4-5 drops of e-liquid into THE TOP before firing it up. The e-liquid will soak into the cotton and this will help you avoid any undesired results. 


Do I get a warranty?

JuiceShop offers a full 28 day in house warranty on all our hardware. Should you experience any issues with a device purchased from us, then please contact us withing the 28 day period. For returns after 28 days, please refer to the manufacturers return procedure. 

If you wish to exchange a product, the item must still be in its original unopened state. 

We can not accept returns on e-liquids. 

ALL RETURNS MUST BE ACCOMPANIED WITH THE ORIGINAL RECEIPT OF SALE.

Related Products



CONFIRM
DECLINE
Please confirm that You are Over the age of 18