Oh, you found me! Use the code "MB1017" and get 10% off Mod batteries

Search
0
Shopping Cart
  • -18%

Eleaf iStick TC200W Mod

  • Availability: In Stock
  • Brand: ELEAF
  • Product Code: iStick TC200W
  • Reward Points: 225

  • Special price:

    £44.99

    Old price:

    £54.99

    You save:

    18%

  • Price in reward points:
    4499

Available Options



Share:

A sleek stylish body, powered by three removable 18650 batteries and engineered to include the latest technology on the vaping market, the iStick TC200W is another fantastic addition to the iStick series of devices.

Powerful with a wattage output of up to 200W, a comfortable button, large OLED screen that displays all your vaping information and easy to use selection buttons ensure the iStick TC200W is great for all vapers.

The durable flip battery door and ergonomic design means the TC200W is extremely comfortable to use, features four firing modes, temperature control (TC), variable wattage (VW), bypass mode and temperature coefficient resistance (TCR) mode - a versatile e-cig that supports a wide range of tanks and coils.

TC mode can be used with nickel, titanium and now stainless steel coils. TCR mode allows customisation of settings depending on the coil material used, further improving the accuracy of temperature control.

Designed with safety in mind the TC200W features dual circuit protection to stop over-charging and over-discharging, while reverse polarity protection ensures battery safety. A stainless steel spring loaded 510 connector is resistant to wear and an on board micro USB port allows for pass-through charging and firmware upgrade.  

 

Features:

  • Three removable 18650 batteries.
  • Temperature control while utilising nickel, titanium or stainless steel atomizer heads.
  • Variable wattage with a power output of up to 200W.
  • Clear OLED screen displaying key settings.
  • Stainless steel threads and spring loaded firing pin.
  • Upgradeable firmware.

 

Specification:

  • Output modes: VW / TC-Ni / TC-Ti / TC-SS / TCR
  • Output wattage: 1-200W
  • Resistance ranges: 0.05-1.5ohm (TC modes) / 0.1-3.5ohm (VW mode)
  • Temperature ranges: 100-315°C/200-600°F
  • Dimensions: 57mm x 37mm x 84mm
  • Colour: Black, Grey, White

 

Kit Includes:

  • 1 x iStick TC200W e-cigarette body
  • 3 x Samsung 25R batteries
  • 1 x USB charging lead
  • 1 x User Manual


WARNING

  • Always fully read the instruction manual before using the device.
  • Always use a high drain battery rated 30Amp or above.
  • Never charge your device using an adapter with an output greater than 1Amp.
  • Always keep loose batteries stored in a safe environment and away from metal objects.

Mod Specification:
Battery 3x 18650
Power 200w
Temperature Control Yes

Write a review

Note: HTML is not translated!
    Bad           Good

Which strength e-liquid should I choose?

This depends on how powerful your machine is. If you run your machine under 20 watts or on a coil rated above 1.2 Ohms, then you might need a higher nicotine dosage in your e-liquid. The higher the wattage of your machine, the less nicotine you need. So somebody using a typical 0.5 Ohm coil running it at about 35 watts will probably be fine with a 3mg. 


Which coil should I use?

Most eCig manufacturers normally produce a selection of different coils for each of their devices. The power of a coil is measured in Ohms. The lower the Ohms, the more power that coil requires in order to get to the right temperature. If your looking for big vapour, then you would use a coil rated 0.5 Ohms or lower. If you wanted a coil that was good for smoking like a cigarette, then anything above 1.2 Ohms will be fine. Coils with higher Ohm ratings require less power and produce less vapour. 


What wattage should I set my device to?

This depends completely on the coil you are using. As discussed above, there are many different types of coils, each with a recommended minimum and maximum wattage.


Why is my device leaking?

There are normally two main reasons why this could be happening.
1) You are running the coil too low. Not giving the coil enough power means it can't turn the liquid into vapour, resulting in flooding or leaking.
2) You are using a powerful coil and puffing on it like a cigarette. Coils rated at 0.5 Ohms or lower are specifically designed for Direct Lung vaping. 


Why do i get a burning taste?

This is normally a sign that the coil is ready to be replaced. This will also happen if you let your juice run too low.


Why must I Prime my coil?

Priming your coil avoids any unwanted burning tastes when firing up a new coil for the first time. To prime a coil, simply put 4-5 drops of e-liquid into THE TOP before firing it up. The e-liquid will soak into the cotton and this will help you avoid any undesired results. 


Do I get a warranty?

JuiceShop offers a full 28 day in house warranty on all our hardware. Should you experience any issues with a device purchased from us, then please contact us withing the 28 day period. For returns after 28 days, please refer to the manufacturers return procedure. 

If you wish to exchange a product, the item must still be in its original unopened state. 

We can not accept returns on e-liquids. 

ALL RETURNS MUST BE ACCOMPANIED WITH THE ORIGINAL RECEIPT OF SALE.

Related Products



CONFIRM
DECLINE
Please confirm that You are Over the age of 18