Oh, you found me! Use the code "MB1017" and get 10% off Mod batteries

Shopping Cart
  • -17%

Joyetech Cuboid Mod

  • Availability: In Stock
  • Brand: JOYETECH
  • Product Code: Cuboid
  • Reward Points: 225

  • Special price:


    Old price:


    You save:


  • Price in reward points:

Available Options


Deceptively small for a device that houses two 18650 batteries, the Cuboid e-cigarette is at the top of its game.

Temperature control (TC) up to 300°C (600°F), up to 150W of power and the latest variable temperature technology allows a range of coil materials to be used, including nickel, titanium and the newly introduced stainless steel.

The Cuboid introduces TCR mode allowing customisation of settings depending on the coil material used, further improving the accuracy of temperature control. The 0.96inch OLED screen is clear and functional showing all your key information at a glance including wattage and temperature settings, atomizer resistance and remaining battery life.

A new style battery compartment houses two removable 18650 batteries. Designed with safety in mind by incorporating reverse polarity protection and a dual battery bar on the screen so you can monitor the charge in both batteries independently. Upgradable firmware keeps you a step ahead of the vaping game, ensuring your Cuboid is completely up to date.

A 5 click on/off function allows safe storage of your Cuboid and the stainless steel 510 thread is durable and allows compatibility with a wide range of tank systems, RDA’s and RTA’s. The inbuilt USB port is great for pass-through charging or updating your Cuboid.



  • Output modes – VW/ VT-Ni/ VT-Ti/ VT-SS316/ TCR mode
  • Output wattage – 1 – 150W
  • Output voltage – 0.5 – 9V
  • Temperature ranges - 100-300°C (200-600°F)
  • Battery type – 2 x 18650
  • Dimensions – 42mm x 28mm x 91.5mm
  • Thread type – 510 thread


Kit Includes:

  • 1 x Cuboid body
  • 1 x USB charging cable
  • 1 x User manual


  • Always fully read the instruction manual before using the device.
  • Always use a high drain battery rated 30Amp or above.
  • Never charge your device using an adapter with an output greater than 1Amp.
  • Always keep loose batteries stored in a safe environment and away from metal objects.

Mod Specification:
Battery 2x 18650
Power 150w
Temperature Control Yes

Write a review

Note: HTML is not translated!
    Bad           Good

Which strength e-liquid should I choose?

This depends on how powerful your machine is. If you run your machine under 20 watts or on a coil rated above 1.2 Ohms, then you might need a higher nicotine dosage in your e-liquid. The higher the wattage of your machine, the less nicotine you need. So somebody using a typical 0.5 Ohm coil running it at about 35 watts will probably be fine with a 3mg. 

Which coil should I use?

Most eCig manufacturers normally produce a selection of different coils for each of their devices. The power of a coil is measured in Ohms. The lower the Ohms, the more power that coil requires in order to get to the right temperature. If your looking for big vapour, then you would use a coil rated 0.5 Ohms or lower. If you wanted a coil that was good for smoking like a cigarette, then anything above 1.2 Ohms will be fine. Coils with higher Ohm ratings require less power and produce less vapour. 

What wattage should I set my device to?

This depends completely on the coil you are using. As discussed above, there are many different types of coils, each with a recommended minimum and maximum wattage.

Why is my device leaking?

There are normally two main reasons why this could be happening.
1) You are running the coil too low. Not giving the coil enough power means it can't turn the liquid into vapour, resulting in flooding or leaking.
2) You are using a powerful coil and puffing on it like a cigarette. Coils rated at 0.5 Ohms or lower are specifically designed for Direct Lung vaping. 

Why do i get a burning taste?

This is normally a sign that the coil is ready to be replaced. This will also happen if you let your juice run too low.

Why must I Prime my coil?

Priming your coil avoids any unwanted burning tastes when firing up a new coil for the first time. To prime a coil, simply put 4-5 drops of e-liquid into THE TOP before firing it up. The e-liquid will soak into the cotton and this will help you avoid any undesired results. 

Do I get a warranty?

JuiceShop offers a full 28 day in house warranty on all our hardware. Should you experience any issues with a device purchased from us, then please contact us withing the 28 day period. For returns after 28 days, please refer to the manufacturers return procedure. 

If you wish to exchange a product, the item must still be in its original unopened state. 

We can not accept returns on e-liquids. 


Related Products

Please confirm that You are Over the age of 18