XTAR VC2 PLUS MASTER CHARGER
- Availability: In Stock
- Brand: XTAR
- Product Code: XTVC2P
- Reward Points: 87
- Price in reward points: 1749
The latest in charger innovation, the VC2 Plus Master is a smart charger that has a countdown timer for each bay, showing the time it needs to fully charge the battery. It can recognize, charge and display both Ni-MH and Li-ion batteries at the same time, and you can totally control the charging speed (0.5A/1.0A) as you like. In order to save time, the USB Output with Power-Path Management System enables you to charge both batteries and the external device at the same time while power is connected!
Countdown timer for each bay showing the time it needs to be fully charged. Battery power icon and percentage display. You can clearly know the battery power and charging status by ramping up from 0% to 100% when the battery is fully charged. And screen also will display “Full” Red LED indicator turns green upon a full charge. USB Output Function:
Power-Path USB output enables you to charge both batteries and the external device at the same time while power is connected. VC2 Plus Master is more than a charger for your batteries. It also a charger for your device. Display the battery power while as a power bank. Clearly know the battery power discharging status by ramping down from 100% to 1% and then stop charging external device.
With Optional charging currents, you can control the charging speed (0.5A/1.0A) as you like. Ensure fast charging while also prolong the battery life. Automatically detect battery type and choose the most suitable charging method. Using TC-CC-CV charging for Li-ion battery and pulse charging for Ni-MH/Ni-CD battery. You can mix and charge all kinds of batteries together. XTAR Current Buffering Charging Technology protects the batteries from high current impact during the charging process.
Intelligent LCD Screen:
Displays charging current, battery power percentage, countdown timer to fully charge. VC2 Plus Master can intelligently recognize/ display/ charge Ni-MH and Li-ion batteries at the same time. If a bad battery can’t be activated, the screen will display “null”, and if polarity-reverse or charger short circuit happens, screen will display “Err”. The backlight will automatically go into an energy saving mode without any operation (e.g. inserting a battery to be charged or pressing a button) after 2 minutes. Feature can be enabled manually by pressing the button for 1.5 seconds to save energy and avoid light pollution.
XTAR 0V Activation Function can revive “damage” (low voltage) battery to save your money. Compatible with any 5V USB power including USB wall adaptors, cell phone chargers, solar panel, PC USB, etc. No need to buy other adaptors. Use 5V 2.1A input power can maximizethe advantages of the VC2 Plus. Automatically stop charging when complete and restart charging function makes it safe to keep the batteries inside the charger overnight. Compatible with 10440/14500/14650/16340/17335/17500/17670/18350/18490/18500/18650/18700/22650/25500/26650/32650 3.6V/3.7V Li-ion/IMR/INR/ICR and AAAA/AAA/AA/A/SC/C/D Ni-MH/Ni-CD batteries ABS durable fireproof shell with perfect heat dissipation and high temperature resistance, keep the cell temperature impressive low during the charging.
- 5V DC / 2.1A
- Net Weight 115g
- Dimensions L131*W66*H33mm
- Operation Temperature 0-40℃
- Apply to 10440/14500/14650/16340/17335/17500/17670/18350/18490/18500/18650/18700/22650/25500/26650/32650 3.6V/3.7V Li-ion/IMR/INR/ICR and AAAA/AAA/AA/A/SC/C/D Ni-MH/Ni-CD batteries
Lithium batteries charging parameter:
- 0.5A Constant Current 500mA
- 1.0A Constant Current 1000mA
- Cut-off Voltage 4.2V±0.05V
Ni-MH batteries charging parameter:
- 0.5A Pulse Charging Current 500mA
- 1.0A Pulse Charging Current 1000mA
- Cut-off voltage 1.40±0.1V
USB output parameter:
- USB output no-load Voltage 5.0±0.25V
- Max output current 1000mA
- Battery over-discharge protection voltage 3.0±0.2V
- XTAR VC2 Plus Master charger
- USB charge cable
- Retail packaging
- Premium pouch
- User manual
- Warranty card
Which strength e-liquid should I choose?
This depends on how powerful your machine is. If you run your machine under 20 watts or on a coil rated above 1.2 Ohms, then you might need a higher nicotine dosage in your e-liquid. The higher the wattage of your machine, the less nicotine you need. So somebody using a typical 0.5 Ohm coil running it at about 35 watts will probably be fine with a 3mg.
Which coil should I use?
Most eCig manufacturers normally produce a selection of different coils for each of their devices. The power of a coil is measured in Ohms. The lower the Ohms, the more power that coil requires in order to get to the right temperature. If your looking for big vapour, then you would use a coil rated 0.5 Ohms or lower. If you wanted a coil that was good for smoking like a cigarette, then anything above 1.2 Ohms will be fine. Coils with higher Ohm ratings require less power and produce less vapour.
What wattage should I set my device to?
This depends completely on the coil you are using. As discussed above, there are many different types of coils, each with a recommended minimum and maximum wattage.
Why is my device leaking?
There are normally two main reasons why this could be happening.
1) You are running the coil too low. Not giving the coil enough power means it can't turn the liquid into vapour, resulting in flooding or leaking.
2) You are using a powerful coil and puffing on it like a cigarette. Coils rated at 0.5 Ohms or lower are specifically designed for Direct Lung vaping.
Why do i get a burning taste?
This is normally a sign that the coil is ready to be replaced. This will also happen if you let your juice run too low.
Why must I Prime my coil?
Priming your coil avoids any unwanted burning tastes when firing up a new coil for the first time. To prime a coil, simply put 4-5 drops of e-liquid into THE TOP before firing it up. The e-liquid will soak into the cotton and this will help you avoid any undesired results.
Do I get a warranty?
JuiceShop offers a full 28 day in house warranty on all our hardware. Should you experience any issues with a device purchased from us, then please contact us withing the 28 day period. For returns after 28 days, please refer to the manufacturers return procedure.
If you wish to exchange a product, the item must still be in its original unopened state.
We can not accept returns on e-liquids.
ALL RETURNS MUST BE ACCOMPANIED WITH THE ORIGINAL RECEIPT OF SALE.