50% OFF ALL 650 & 1100 MAH EGO BATTERIES

Click here

Search
0
Shopping Cart
NEW!

Wismec Predator 228 Mod

  • Availability: In Stock
  • Brand: WISMEC
  • Product Code: Predator228
  • Reward Points: 270

  • £54.99

  • Price in reward points:
    5499

Available Options



Share:

The Wismec Predator 228 is a compact, dual 18650 battery mod. High powered with a wattage range of up to 228W, various output modes and an ergonomic, stylish design, making this an ideal e-cig battery body for a range of e-liquid tanks.

The Wismec Predator 228 supports two removable 18650 batteries, which are easily charged using the bottom battery door. Cell balancing technology allows your 18650 batteries to be charged within the mod, utilising the front USB port. The Predator also supports quick charging when using a compatible USB lead and wall charger.

To keep the ergonomic design, the firing button has been hidden behind one of the side panels. The large OLED screen displays all your vaping information such as remaining battery life and temperature settings.

A variety of output modes are controlled using the front position buttons. Temperature control, bypass mode and smart mode are all available meaning the Wismec Predator 228 is a perfect match for a wide range of e-liquid tanks.

Using the RC adaptor (sold separately), the Wismec Predator 228 can be used as a power bank to charge external electrical devices.

 

Specification:

  • Battery - 18650, 2100mAh (supplied)
  • Output modes - VW / Bypass / Smart / TC (Ni, Ti, SS) / TCR
  • Output wattage - 1-228W
  • Resistance ranges - 0.05-1.5ohm (TC modes) / 0.1-3.5ohm (VW/Bypass/Smart mode)
  • Temperature ranges - 100-315°C / 200-600°F
  • Dimensions - 86.7mm x 29mm x 43.6mm

 

Kit Includes:

  • 1 x Wismec Predator 228
  • 2 x Batteries
  • 1 x USB charging cable
  • 1 x User manual


WARNING

  • Always fully read the instruction manual before using the device.
  • Always use a high drain battery rated 30Amp or above.
  • Never charge your device using an adapter with an output greater than 1Amp.
  • Always keep loose batteries stored in a safe environment and away from metal objects.

Mod Specification:
Battery 2x 18650
Power 228w
Temperature Control Yes

Write a review

Note: HTML is not translated!
    Bad           Good

Which strength e-liquid should I choose?

This depends on how powerful your machine is. If you run your machine under 20 watts or on a coil rated above 1.2 Ohms, then you might need a higher nicotine dosage in your e-liquid. The higher the wattage of your machine, the less nicotine you need. So somebody using a typical 0.5 Ohm coil running it at about 35 watts will probably be fine with a 3mg. 


Which coil should I use?

Most eCig manufacturers normally produce a selection of different coils for each of their devices. The power of a coil is measured in Ohms. The lower the Ohms, the more power that coil requires in order to get to the right temperature. If your looking for big vapour, then you would use a coil rated 0.5 Ohms or lower. If you wanted a coil that was good for smoking like a cigarette, then anything above 1.2 Ohms will be fine. Coils with higher Ohm ratings require less power and produce less vapour. 


What wattage should I set my device to?

This depends completely on the coil you are using. As discussed above, there are many different types of coils, each with a recommended minimum and maximum wattage.


Why is my device leaking?

There are normally two main reasons why this could be happening.
1) You are running the coil too low. Not giving the coil enough power means it can't turn the liquid into vapour, resulting in flooding or leaking.
2) You are using a powerful coil and puffing on it like a cigarette. Coils rated at 0.5 Ohms or lower are specifically designed for Direct Lung vaping. 


Why do i get a burning taste?

This is normally a sign that the coil is ready to be replaced. This will also happen if you let your juice run too low.


Why must I Prime my coil?

Priming your coil avoids any unwanted burning tastes when firing up a new coil for the first time. To prime a coil, simply put 4-5 drops of e-liquid into THE TOP before firing it up. The e-liquid will soak into the cotton and this will help you avoid any undesired results. 


Do I get a warranty?

JuiceShop offers a full 28 day in house warranty on all our hardware. Should you experience any issues with a device purchased from us, then please contact us withing the 28 day period. For returns after 28 days, please refer to the manufacturers return procedure. 

If you wish to exchange a product, the item must still be in its original unopened state. 

We can not accept returns on e-liquids. 

ALL RETURNS MUST BE ACCOMPANIED WITH THE ORIGINAL RECEIPT OF SALE.

Related Products



CONFIRM
DECLINE
Please confirm that You are Over the age of 18