Aspire Atlantis Evo
- Availability: Out Of Stock
- Brand: Aspire
- Product Code: Atlantis Evo
- Reward Points: 90
- Price in reward points: 1799
The Aspire Atlantis EVO represents the zenith of recent sub-ohm tank evolution. Double wicking efficiency teamed with lower positioned wick points create ultra-efficient juice flow. This optimized design allows high VG E-Liquid an even faster route to the coil system. EVO breathes without a hitch when you require thick dense vapor production. Both Standard & Extended EVO kits include 0.4Ω and 0.5Ω sub-ohm coils for an optimized vaping experience.
Aspire Atlantis EVO comes with both 0.4Ω and 0.5Ω Kanthal Clapton coils. Having coil options enables the EVO to achieve your preferred taste requirements when using a wide array of E-liquid flavors. 0.4Ω coils have larger airflow for greater vapor production and balanced flavor. 0.5Ω coils produce a more dense vapor highlighting the flavor differently. Switch between EVO coils as needed to ensure you are maximizing your vaping experience.
Each Aspire Atlantis EVO comes with a cuff. EVO cuffs are also compatible with the Aspire Cleito. These cuffs help to dissipate heat. They also allow you to color coordinate with your mod or use them as a visual cue to remind you which E-liquid you have in your tank. EVO Tank cuff color combinations shown above.
The Atlantis EVO has a quick & clean top-fill tank. Refill your EVO tank in seconds. You can drip, drop or pour your E-liquid into the EVO and be back to vaping in no time. Note: For first time using a new atomizer, you will need to wait 5 minutes for the cotton to absorb the E-liquid.
Double wicking efficiency, due to enlarged cotton exposure holes, is teamed with lower positioned wick points. This creates ultra-efficient juice flow and will allow high VG juices an even faster route to the coil system. The included 0.4Ω & 0.5Ω Kanthal Clapton coils are serviced by four spacious and adjustable airflow holes. This keeps the Atlantis EVO breathing when you require thick dense vapor production.
The Aspire Atlantis Evo comes in two versions: Standard (2ML) and Extended (4ML). The Standard version is targeted for the UK and other countries with TPD regulations. 4ML is for the North American and other markets. The Extended version comes with an adapter and a 4ML Pyrex tube for larger tank capacity.
Atlantis EVO atomizer installation is simple. Unscrew the top cap and remove Pryex tube. Unscrew the old atomizer and screw the replacement atomizer in.
- 1 * Atlantis Evo tank (2ml Pyrex, 0.4Ω coil pre-installed)
- 1 * Replacement glass tube (2ml)
- 1 * Extra coil (0.5Ω) /
- 1 * Rubber cuff
Which strength e-liquid should I choose?
This depends on how powerful your machine is. If you run your machine under 20 watts or on a coil rated above 1.2 Ohms, then you might need a higher nicotine dosage in your e-liquid. The higher the wattage of your machine, the less nicotine you need. So somebody using a typical 0.5 Ohm coil running it at about 35 watts will probably be fine with a 3mg.
Which coil should I use?
Most eCig manufacturers normally produce a selection of different coils for each of their devices. The power of a coil is measured in Ohms. The lower the Ohms, the more power that coil requires in order to get to the right temperature. If your looking for big vapour, then you would use a coil rated 0.5 Ohms or lower. If you wanted a coil that was good for smoking like a cigarette, then anything above 1.2 Ohms will be fine. Coils with higher Ohm ratings require less power and produce less vapour.
What wattage should I set my device to?
This depends completely on the coil you are using. As discussed above, there are many different types of coils, each with a recommended minimum and maximum wattage.
Why is my device leaking?
There are normally two main reasons why this could be happening.
1) You are running the coil too low. Not giving the coil enough power means it can't turn the liquid into vapour, resulting in flooding or leaking.
2) You are using a powerful coil and puffing on it like a cigarette. Coils rated at 0.5 Ohms or lower are specifically designed for Direct Lung vaping.
Why do i get a burning taste?
This is normally a sign that the coil is ready to be replaced. This will also happen if you let your juice run too low.
Why must I Prime my coil?
Priming your coil avoids any unwanted burning tastes when firing up a new coil for the first time. To prime a coil, simply put 4-5 drops of e-liquid into THE TOP before firing it up. The e-liquid will soak into the cotton and this will help you avoid any undesired results.
Do I get a warranty?
JuiceShop offers a full 28 day in house warranty on all our hardware. Should you experience any issues with a device purchased from us, then please contact us withing the 28 day period. For returns after 28 days, please refer to the manufacturers return procedure.
If you wish to exchange a product, the item must still be in its original unopened state.
We can not accept returns on e-liquids.
ALL RETURNS MUST BE ACCOMPANIED WITH THE ORIGINAL RECEIPT OF SALE.