NITECORE New i4 Intellicharger

The Nitecore New i4 Intellicharger is a four bay charger, compatible with 1.2V, 3.7V, 4.2V and 4.35V batteries and a range of cells.

The NEW i4 charger from Nitecore improves upon the original model with six new features:

• 100% Charging Acceleration

• Active Current Distribution Technology

• Expanded Compatibility to Support 3.7V and 4.35V batteries

• IMR Battery Restoration

• Automatic Current Selection Based on Battery Capacity

• Automatic Detection of Non-Rechargeable Lithium Batteries

100% Charging acceleration means the Nitecore NEW i4 can charge at up to 1500mA current in one slot.

Active current distribution (ACD) technology allows for the dynamic distribution of the NEW i4's charging power. For example, if two batteries are being charged in the NEW i4 and one of them completes charging, all charging power will automatically go to the other slot and charge the battery at the fastest speed.

Expanded compatibility to support 3.7V and 4.35V batteries allows you to charge a host of batteries with a single charger. Compatible with 1.2V, 3.7V, 4.2V and 4.35V. By simple operation with the V button it is easy to set charging voltage in each slot independently.

IMR battery restoration will restore 0V depleted cells by pressing and holding both the C and V buttons simultaneously.

The NEW i4 can intelligently select the most appropriate charging current based on automatic battery capacity detection.

The charger comes with a 3 pin UK plug. 

Safety features include:

• Optimisation for IMR charging by monitoring the voltage stays within safe limits

• Overtime charging protection, limiting to 20 hours

• Made from fire retardant, flame resistant materials

• Automatic Intelligent Temperature Control preventing overheating

  
  

Specification:

• Input: AC 100-240V 50/60Hz 0.35A(MAX) or DC 12V 1A
• 4.35V±1%/4.2V±1%/ 3.7V±1%/1.48V±1%
• Dimensions: 5.43” × 3.74” × 1.42” (138mm × 95mm × 36mm)
• Weight: 6.49oz (184g) (without batteries and power cord)

• Compatible with Li-ion/IMR/LiFePO4: 10340, 10350, 10440, 10500, 12340, 12500, 12650, 13450, 13500, 13650, 14350, 14430, 14500, 14650, 16500, 16340(RCR123), 16650, 17350, 17500, 17650, 17670, 18350, 18490, 18500, 18650, 22500, 22650, 25500, 26500, 26650 Flat-topped Batteries: 18700, 20700, 21700 Ni-MH(NiCd):

  AA, AAA, AAAA, C, D

  
  

  
  

  
  

  
  

  WARNING     -Always fully read the instruction manual before using the device.     -Always check the instruction manual to find the appropriate discharge current needed for the batteries when using with a device or tank.     -Always lock the device before you put it in your pocket or handbag (normally 5 clicks).     -Never leave batteries charging overnight or unattended and must be charged at room temperature in a well ventilated area.     -Never charge your device using an adapter with an output greater than 1Amp unless specified.     -Never store batteries loose with other metal objects such as keys or coins that could bridge across the terminals.      -Always store batteries in a non-conductive case when not in use.      Please click here for full battery safety information.