Aspire Cleito 120 Pro Tank
- Availability: In Stock
- Brand: Aspire
- Product Code: ASCP12
- Reward Points: 130
- Price in reward points: 2599
Aspire are proud to announce the latest addition to the Cleito range, introducing the Cleito 120 Pro Tank. The Cleito 120 Pro comes with a 0.15 mesh coil pre-installed, plus Aspire’s Cleito120 coil rated at 0.16 ohms, both are compatible with the original Cleito 120 tank, both have phenomenal wicking capability for these types of coil, which ensures increased vapor and flavor, just as you’d expect from Aspire innovations. With the improved flavor and vapor production, you can form your own mini weather system each time you vape!
The Cleito 120 Pro comes in two capacities 3.0ml, and for TPD areas there is a 2ml TPD version. In non TPD areas there is also included a 4.2ml bubble glass for extra capacity. With a 25mm diameter deck, 52 mm overall height and wide bore, comfortably curved Delrin drip-tip, the Cleito 120 Pro is optimized for flavor and vapor production, and they look great on any mod!
Both coils are excellent for vapor production and compatible with Cleito 120 tank. While the Cleito 120 Pro coil is rated at 0.16 ohms and 100-120 watts, the mesh coil is rated at 0.15 ohms and 60-75 watts, and like all mesh coils, will further enhance flavor.
The triple slot bottom airflow is easy to adjust to your own particular preference , and the Cleito 120 Pro comes with a pro style extra wide bore delrin drip tip, just like the Cleito Pro. Enlarged wicking holes means the tank breathes without a hitch even when chain vaping. The Cleito 120 Pro is ideal for cloud chasers and vapers who enjoy dense, delicious flavor, especially with the mesh coil.
The Cleito Pro 120 is easy to fill thanks to a top side-fill slot – no need to unscrew. Slide up the top ring to reveal the filling slot marked with the three dots, and fill with your preferred e-liquid. Note: To avoid spillage when filling, keep the three dots marking the location of the fill port uppermost, as shown above.
Fitting or replacing the coils in the Cleito 120 Pro couldn’t be simpler, unscrew the top section including the Delrin drip tip, unscrew and remove the coil (if fitted) and screw in the new coil. Remember to let the coil stand for a few minutes to thoroughly saturate the wicking material before vaping.
- 1* 2ml Cleito 120 Pro tank
- 2* Coils (1*0.16Ω & 1*0.15Ω Mesh Coil)
- 1* Glass tube
- 6* O-rings
- 1* User manual
- 1* Warranty card
Which strength e-liquid should I choose?
This depends on how powerful your machine is. If you run your machine under 20 watts or on a coil rated above 1.2 Ohms, then you might need a higher nicotine dosage in your e-liquid. The higher the wattage of your machine, the less nicotine you need. So somebody using a typical 0.5 Ohm coil running it at about 35 watts will probably be fine with a 3mg.
Which coil should I use?
Most eCig manufacturers normally produce a selection of different coils for each of their devices. The power of a coil is measured in Ohms. The lower the Ohms, the more power that coil requires in order to get to the right temperature. If your looking for big vapour, then you would use a coil rated 0.5 Ohms or lower. If you wanted a coil that was good for smoking like a cigarette, then anything above 1.2 Ohms will be fine. Coils with higher Ohm ratings require less power and produce less vapour.
What wattage should I set my device to?
This depends completely on the coil you are using. As discussed above, there are many different types of coils, each with a recommended minimum and maximum wattage.
Why is my device leaking?
There are normally two main reasons why this could be happening.
1) You are running the coil too low. Not giving the coil enough power means it can't turn the liquid into vapour, resulting in flooding or leaking.
2) You are using a powerful coil and puffing on it like a cigarette. Coils rated at 0.5 Ohms or lower are specifically designed for Direct Lung vaping.
Why do i get a burning taste?
This is normally a sign that the coil is ready to be replaced. This will also happen if you let your juice run too low.
Why must I Prime my coil?
Priming your coil avoids any unwanted burning tastes when firing up a new coil for the first time. To prime a coil, simply put 4-5 drops of e-liquid into THE TOP before firing it up. The e-liquid will soak into the cotton and this will help you avoid any undesired results.
Do I get a warranty?
JuiceShop offers a full 28 day in house warranty on all our hardware. Should you experience any issues with a device purchased from us, then please contact us withing the 28 day period. For returns after 28 days, please refer to the manufacturers return procedure.
If you wish to exchange a product, the item must still be in its original unopened state.
We can not accept returns on e-liquids.
ALL RETURNS MUST BE ACCOMPANIED WITH THE ORIGINAL RECEIPT OF SALE.