Oh, you found me! Use the code "MB1017" and get 10% off Mod batteries

Search
0
Shopping Cart

SMOK X-PRIV BABY KIT + E-LIQUID

  • Availability: In Stock
  • Brand: SMOK
  • Product Code: SMXPBK
  • Reward Points: 275

  • £54.99

  • Price in reward points:
    5499

Available Options



Share:

SMOK X-PRIV Baby 80W Starter Kit is the follow-up edition of the appraised X-PRIV, implementing a compact-sized device with the high-quality impression of the original to pair with the TFV12 Big Baby Prince Tank. Maintaining the crowning achievements of utilizing a large screen display, measuring an impressive 2.0 Inch High-Definition screen with full-color resolution. The X-PRIV Baby is equipped with a 2300mAh built-in battery, capable of firing up to 80W of maximum power and full temperature suite. Pairing with the device is the TFV12 Big Baby Prince Tank, implementing a maximum capacity of 6 milliliters, new button-lock hinged top-fill, smooth dual bottom airflow control, and the utilization of the TFV8 Baby Coil System.

MAG Baby Mod:

  • Dimensions - 47mm by 29mm by 68mm
  • Built-in 2300mAh Rechargeable Battery
  • Maximum Wattage Output: 1-80W
  • Min Atomizer Resistance: 0.05ohm
  • Temperature Range: 200-600F
  • Supports Ni200 Nickel, Titanium, and Stainless Steel Heating Elements
  • 2" Full-Color TFT Screen - High-Definition Resolution
  • Oversized Firing Bar Mechanism
  • Two Adjustment Buttons
  • Puff Monitoring System
  • Intelligent Atomizer Recognition
  • Short Circuit Protection
  • Over-Heat Protection
  • Low Voltage Protection
  • 10 Seconds Cut-Off
  • MicroUSB Port
  • 510 Connection

TFV12 Big Baby Tank:

  • 28mm Diameter at Widest Point
  • 2ml Maximum Juice Capacity
  • Superior Stainless Steel Construction
  • Food-Grade High-Grade Glass Reinforcement
  • High-Temperature Resistant
  • Convenient Top-Fill Rotary Design with Lock Button Mechanism
  • Massive Dual Adjustable Airflow Control at Base
  • Compatible with TFV8 Baby Coils
  • 810 Cobra Resin Ultra-Wide Drip Tip
  • 510 Connection

Kit Includes:

  • 1x X-Priv Baby Mod
  • 1x TFV12 Big Baby Prince Tank
  • 2x 0.4ohm Baby-Q2 Coil
  • 1x Replacement Glass
  • 1x USB Cable
  • User Manual
  • Spare Parts
  • 1x Free 10ml Double Drip E-liquid



WARNING

  • Always fully read the instruction manual before using the device.
  • Always turn your device off when travelling (normally 5 clicks).
  • Never charge your device using an adapter with an output greater than 1Amp.
  • Always keep loose batteries stored in a safe environment and away from metal objects.

Write a review

Please login or register to review

Which strength e-liquid should I choose?

This depends on how powerful your machine is. If you run your machine under 20 watts or on a coil rated above 1.2 Ohms, then you might need a higher nicotine dosage in your e-liquid. The higher the wattage of your machine, the less nicotine you need. So somebody using a typical 0.5 Ohm coil running it at about 35 watts will probably be fine with a 3mg. 


Which coil should I use?

Most eCig manufacturers normally produce a selection of different coils for each of their devices. The power of a coil is measured in Ohms. The lower the Ohms, the more power that coil requires in order to get to the right temperature. If your looking for big vapour, then you would use a coil rated 0.5 Ohms or lower. If you wanted a coil that was good for smoking like a cigarette, then anything above 1.2 Ohms will be fine. Coils with higher Ohm ratings require less power and produce less vapour. 


What wattage should I set my device to?

This depends completely on the coil you are using. As discussed above, there are many different types of coils, each with a recommended minimum and maximum wattage.


Why is my device leaking?

There are normally two main reasons why this could be happening.
1) You are running the coil too low. Not giving the coil enough power means it can't turn the liquid into vapour, resulting in flooding or leaking.
2) You are using a powerful coil and puffing on it like a cigarette. Coils rated at 0.5 Ohms or lower are specifically designed for Direct Lung vaping. 


Why do i get a burning taste?

This is normally a sign that the coil is ready to be replaced. This will also happen if you let your juice run too low.


Why must I Prime my coil?

Priming your coil avoids any unwanted burning tastes when firing up a new coil for the first time. To prime a coil, simply put 4-5 drops of e-liquid into THE TOP before firing it up. The e-liquid will soak into the cotton and this will help you avoid any undesired results. 


Do I get a warranty?

JuiceShop offers a full 28 day in house warranty on all our hardware. Should you experience any issues with a device purchased from us, then please contact us withing the 28 day period. For returns after 28 days, please refer to the manufacturers return procedure. 

If you wish to exchange a product, the item must still be in its original unopened state. 

We can not accept returns on e-liquids. 

ALL RETURNS MUST BE ACCOMPANIED WITH THE ORIGINAL RECEIPT OF SALE.

Related Products



CONFIRM
DECLINE
Please confirm that You are Over the age of 18