IN STOCK - ONLY AVAILABLE IN STORE OR WHEN PLACING A TELEPHONE ORDER
Following on from the international success of the arc range of e-cigs, TECC introduces the arc 3. Outstanding quality at an exceptional price, the arc 3 keeps all the loved features of the arc 2 with some outstanding improvements.
A 2600mAh integrated battery will power your arc 3 up to 40W and now has the ability to power sub-ohm atomizers and a spring loaded firing pin, making it compatible with a wide range of tanks, RDA’s and RTA’s. Stainless steel threads ensure the longevity of your arc 3, a clear OLED screen displays all your key vaping information at a glance.
5 click on/off functionality allows safe storage of the device, and the pass-through capability gives you the option to use the device whilst it is charging.
The kit comes complete with the specially selected CS Air atomizer tank, fitted with a 1.5ohm atomizer, providing the vaper with the opportunity to utilise the full extent of the battery output thus producing greater amounts of vapour to suit personal preference. Also the ability to adjust the air flow without the risk of leaking. 0.75ohm CS atomizers are available as an optional extra, and perform well for those seeking just little more density of vapour.
The arc 3 contains a more refined and accurate electronics package than the arc 20W. Due to this, when progressing from an arc or Curve 20W to the arc 3, the following should be considered to get the vaping experience you expect. Put simply, the arc or Curve 20W electronics calculated power and voltage for output incorrectly, and although the devices worked well, they provided significantly higher effective voltage and power than the values displayed to the user. The difference is most apparent at lower settings, and the miscalculation evens out completely at around 5.5V. What you saw, was not what you got. This has been corrected in the electronics of the arc 3.
- 2600mAh internal battery
- OLED screen to display all information
- Up to 40W of power
- Stainless steel threads and spring loaded firing pin
- Battery capacity – 2600mAh
- Tank capacity – 2.5ml
- Atomizer resistance – 1.5ohm
- Output wattage – Up to 40W
- 1 x arc 3 battery
- 1 x CS Air tank
- 1 x CS atomizer head (fitted)
- 1 x USB cable
- 1 x User manual
Which strength e-liquid should I choose?
This depends on how powerful your machine is. If you run your machine under 20 watts or on a coil rated above 1.2 Ohms, then you might need a higher nicotine dosage in your e-liquid. The higher the wattage of your machine, the less nicotine you need. So somebody using a typical 0.5 Ohm coil running it at about 35 watts will probably be fine with a 3mg.
Which coil should I use?
Most eCig manufacturers normally produce a selection of different coils for each of their devices. The power of a coil is measured in Ohms. The lower the Ohms, the more power that coil requires in order to get to the right temperature. If your looking for big vapour, then you would use a coil rated 0.5 Ohms or lower. If you wanted a coil that was good for smoking like a cigarette, then anything above 1.2 Ohms will be fine. Coils with higher Ohm ratings require less power and produce less vapour.
What wattage should I set my device to?
This depends completely on the coil you are using. As discussed above, there are many different types of coils, each with a recommended minimum and maximum wattage.
Why is my device leaking?
There are normally two main reasons why this could be happening.
1) You are running the coil too low. Not giving the coil enough power means it can't turn the liquid into vapour, resulting in flooding or leaking.
2) You are using a powerful coil and puffing on it like a cigarette. Coils rated at 0.5 Ohms or lower are specifically designed for Direct Lung vaping.
Why do i get a burning taste?
This is normally a sign that the coil is ready to be replaced. This will also happen if you let your juice run too low.
Why must I Prime my coil?
Priming your coil avoids any unwanted burning tastes when firing up a new coil for the first time. To prime a coil, simply put 4-5 drops of e-liquid into THE TOP before firing it up. The e-liquid will soak into the cotton and this will help you avoid any undesired results.
Do I get a warranty?
JuiceShop offers a full 28 day in house warranty on all our hardware. Should you experience any issues with a device purchased from us, then please contact us withing the 28 day period. For returns after 28 days, please refer to the manufacturers return procedure.
If you wish to exchange a product, the item must still be in its original unopened state.
We can not accept returns on e-liquids.
ALL RETURNS MUST BE ACCOMPANIED WITH THE ORIGINAL RECEIPT OF SALE.