XTAR VC4 CHARGER
- Availability: In Stock
- Brand: XTAR
- Product Code: XTVC4
- Reward Points: 110
- Price in reward points: 2199
The XTAR VC4 charger is a combination of our XP4C and VC2 charger. This intelligent charger can recognize, charge, and display charging current, battery voltage, and charge capacity of both Ni-MH and Li-ion batteries at the same time. This is a USB powered charger so it can be plugged into any of your existing AC USB wall adapter plugs (e.g. Apple, Samsung, etc.)
Lithium battery charging parameter:
- Input Power DC 5.0V 2.1A
- 0.5A CC Current 500±50m A
- 1.0A CC Current 1000±80m A
- Cut-off Voltage 4.20±0.05V
- Operation Temperature 0-40℃
Ni-MH battery charging parameter:
- Input Power DC 5.0V 2.1A 0.5A
- Pulse Charging Current 500±50 mA
- 1.0A Pulse Charging Current 1000±80 mA
- Cut-off Voltage 1.45±0.1V
- Operation Temperature 0-40℃
There is a protective sticker on all charger screens and it may appear to be scratched when you receive it. Don’t worry, simply remove this sticker to see the actual screen.
The charger makes an estimate of how much the battery has taken in mAh, this is what it has put in the battery and does not account for anything that was already in there, it also does not know how the battery will react on discharge, while this charger give some information that is to some degree useful, it is not giving you a absolute true reading of battery capacity. The only way to do this is by applying a load on the battery at a constant current and monitoring as it discharges.
Which strength e-liquid should I choose?
This depends on how powerful your machine is. If you run your machine under 20 watts or on a coil rated above 1.2 Ohms, then you might need a higher nicotine dosage in your e-liquid. The higher the wattage of your machine, the less nicotine you need. So somebody using a typical 0.5 Ohm coil running it at about 35 watts will probably be fine with a 3mg.
Which coil should I use?
Most eCig manufacturers normally produce a selection of different coils for each of their devices. The power of a coil is measured in Ohms. The lower the Ohms, the more power that coil requires in order to get to the right temperature. If your looking for big vapour, then you would use a coil rated 0.5 Ohms or lower. If you wanted a coil that was good for smoking like a cigarette, then anything above 1.2 Ohms will be fine. Coils with higher Ohm ratings require less power and produce less vapour.
What wattage should I set my device to?
This depends completely on the coil you are using. As discussed above, there are many different types of coils, each with a recommended minimum and maximum wattage.
Why is my device leaking?
There are normally two main reasons why this could be happening.
1) You are running the coil too low. Not giving the coil enough power means it can't turn the liquid into vapour, resulting in flooding or leaking.
2) You are using a powerful coil and puffing on it like a cigarette. Coils rated at 0.5 Ohms or lower are specifically designed for Direct Lung vaping.
Why do i get a burning taste?
This is normally a sign that the coil is ready to be replaced. This will also happen if you let your juice run too low.
Why must I Prime my coil?
Priming your coil avoids any unwanted burning tastes when firing up a new coil for the first time. To prime a coil, simply put 4-5 drops of e-liquid into THE TOP before firing it up. The e-liquid will soak into the cotton and this will help you avoid any undesired results.
Do I get a warranty?
JuiceShop offers a full 28 day in house warranty on all our hardware. Should you experience any issues with a device purchased from us, then please contact us withing the 28 day period. For returns after 28 days, please refer to the manufacturers return procedure.
If you wish to exchange a product, the item must still be in its original unopened state.
We can not accept returns on e-liquids.
ALL RETURNS MUST BE ACCOMPANIED WITH THE ORIGINAL RECEIPT OF SALE.